The HV-500R high volume air sampler is designed for suction rates of 100 to 800 L/min. It is compact to simplify on-site sampling, measurements, and transport.
By combining it with an inertial impact type particle size separator, a shuttle tube, or various other optionally available equipment, it can be used for multiple applications as an air sampler for work and atmospheric environments.
Applications
● Measuring dust at factories and other work environments
● Dioxin sampling at incinerators
● Dioxins when dismantling waste incineration facilities
Features
- The constant flowrate unit suppresses suction flowrate drops associated with collecting volume increases.
- The digital display shows the accumulated flowrate, suction pressure, and the instantaneous flowrate.
- A brush-less motor has been adopted, which limits dust production.
- Noise countermeasures have been taken.
- In combination with an optional adapter, a shuttle tube for dioxin sampling can also be attached.
- In combination with an optional particle size separator, it can also sample particle separation characteristics, cutting 100 % of particles 10 μm and larger.
Specifications
| Model | HV-500R(for Dust) | |
| Particle Separation Characteristics | Open face | |
| Suction Pump | Brush-less blower | |
| Flow Rate Detection | Differential pressure detection system | |
| Suction Pressure | -160hPa(500L/min) | |
| Power Failure Processing | Operation prior to the outage continues after recovery from the outage | |
| Flow Accuracy | Within ±5 % of the set flowrate value | |
| Mass | Approximately8.0kg | |
| Suction Flow Rate | 500L/min(110mm dia glass fiber filter,when one is installed) | |
| Display | Touch panel LCD screen (with backlight) | |
| Operating Environment | Temperature 0-40ºC | |
| Power Supply | AC100V50/60Hz 10A | |
| Body Dimensions | 425(W)x200(D)x270(H)mm | |
| Accessories | Filter paper Filter paper clip 1 set | |
| Dia. 110mm fiberglass filter | ||
| GB-100R-110A (10 sheets) | ||
